DVSA Statistics
2012 Derbi Senda
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Derbi Senda (only 34 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 34 DVSA anonymised MOT tests · About this data
Pass Rate
76.5%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 34 recorded tests.
Pre-MOT Checklist for 2012 Derbi Senda
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Derbi Senda.
Frequently Asked Questions
Is a 2012 Derbi Senda likely to fail its MOT?
Based on DVSA statistics, the 2012 Derbi Senda has a 76.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 Derbi Senda?
The most common MOT failure reasons for a 2012 Derbi Senda are: a transmission belt, chain, sprocket or pulley excessively loose or worn, brake lining or pad worn below 1.0mm, a wheel bearing with excessive play. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Derbi Senda fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission belt, chain, sprocket or pulley excessively loose or worn, brake lining or pad worn below 1.0mm, a wheel bearing with excessive play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Derbi Sendas fail their MOT?
Around 24% of 2012 Derbi Sendas fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are a transmission belt, chain, sprocket or pulley excessively loose or worn and brake lining or pad worn below 1.0mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Derbi Senda MOT?
Before your 2012 Derbi Senda MOT, check these commonly-failed items: a transmission belt, chain, sprocket or pulley excessively loose or worn, brake lining or pad worn below 1.0mm, a wheel bearing with excessive play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Derbi Senda reliable for MOT?
With a 76.5% MOT pass rate, the 2012 Derbi Senda performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.