DVSA Statistics
2015 Derbi Senda
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2015 Derbi Senda (only 42 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 42 DVSA anonymised MOT tests · About this data
Pass Rate
78.6%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 42 recorded tests.
Pre-MOT Checklist for 2015 Derbi Senda
Based on common failure points for this model, check these items before your MOT:
- 1
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Derbi Senda.
Frequently Asked Questions
Is a 2015 Derbi Senda likely to fail its MOT?
Based on DVSA statistics, the 2015 Derbi Senda has a 78.6% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2015 Derbi Senda?
The most common MOT failure reasons for a 2015 Derbi Senda are: a transmission belt, chain, sprocket or pulley excessively loose or worn, a shock absorber not functioning or leaking severely, brake lining or pad worn below 1.0mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2015 Derbi Senda fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission belt, chain, sprocket or pulley excessively loose or worn, a shock absorber not functioning or leaking severely, brake lining or pad worn below 1.0mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2015 Derbi Sendas fail their MOT?
Around 21% of 2015 Derbi Sendas fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are a transmission belt, chain, sprocket or pulley excessively loose or worn and a shock absorber not functioning or leaking severely. Pre-checking these items can significantly improve your chances.
What should I check before my 2015 Derbi Senda MOT?
Before your 2015 Derbi Senda MOT, check these commonly-failed items: a transmission belt, chain, sprocket or pulley excessively loose or worn, a shock absorber not functioning or leaking severely, brake lining or pad worn below 1.0mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2015 Derbi Senda reliable for MOT?
With a 78.6% MOT pass rate, the 2015 Derbi Senda performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.