DVSA Statistics
2000 Ferrari 360
MOT Pass Rate & Pre-MOT Checklist
Used 2000 Ferrari 360s usually pass their MOT, but around 7% still fail, most often for a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits and parking brake efficiency below minimum requirement. Based on 186 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 186 DVSA anonymised MOT tests · About this data
Pass Rate
93%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 186 recorded tests.
Pre-MOT Checklist for 2000 Ferrari 360
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ferrari 360.
Frequently Asked Questions
Is a 2000 Ferrari 360 likely to fail its MOT?
Based on DVSA statistics, the 2000 Ferrari 360 has a 93% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2000 Ferrari 360?
The most common MOT failure reasons for a 2000 Ferrari 360 are: a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits, parking brake efficiency below minimum requirement. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Ferrari 360 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits, parking brake efficiency below minimum requirement. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Ferrari 360s fail their MOT?
Around 7% of 2000 Ferrari 360s fail their MOT test, meaning roughly 1 in 14 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and emissions levels exceed the manufacturer's specified limits. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Ferrari 360 MOT?
Before your 2000 Ferrari 360 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, emissions levels exceed the manufacturer's specified limits, parking brake efficiency below minimum requirement. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Ferrari 360 reliable for MOT?
With a 93% MOT pass rate, the 2000 Ferrari 360 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.