DVSA Statistics
1997 Fiat Bravo
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Fiat Bravo (only 9 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 9 DVSA anonymised MOT tests · About this data
Pass Rate
77.8%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 9 recorded tests.
Pre-MOT Checklist for 1997 Fiat Bravo
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 5
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Fiat Bravo.
Frequently Asked Questions
Is a 1997 Fiat Bravo likely to fail its MOT?
Based on DVSA statistics, the 1997 Fiat Bravo has a 77.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1997 Fiat Bravo?
The most common MOT failure reasons for a 1997 Fiat Bravo are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Fiat Bravo fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Fiat Bravos fail their MOT?
Around 22% of 1997 Fiat Bravos fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Fiat Bravo MOT?
Before your 1997 Fiat Bravo MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Fiat Bravo reliable for MOT?
With a 77.8% MOT pass rate, the 1997 Fiat Bravo performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.