DVSA Statistics
1997 Fiat Pininfarina
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Fiat Pininfarina (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1997 Fiat Pininfarina
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Fiat Pininfarina.
Frequently Asked Questions
Is a 1997 Fiat Pininfarina likely to fail its MOT?
Based on DVSA statistics, the 1997 Fiat Pininfarina has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1997 Fiat Pininfarina?
The most common MOT failure reasons for a 1997 Fiat Pininfarina are: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a transmission shaft constant velocity joint boot severely deteriorated. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Fiat Pininfarina fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a transmission shaft constant velocity joint boot severely deteriorated. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Fiat Pininfarinas fail their MOT?
Around 50% of 1997 Fiat Pininfarinas fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Fiat Pininfarina MOT?
Before your 1997 Fiat Pininfarina MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, a transmission shaft constant velocity joint boot severely deteriorated. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Fiat Pininfarina reliable for MOT?
With a 50% MOT pass rate, the 1997 Fiat Pininfarina performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.