DVSA Statistics
1994 Fiat Punto
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1994 Fiat Punto (only 34 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 34 DVSA anonymised MOT tests · About this data
Pass Rate
58.8%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 34 recorded tests.
Pre-MOT Checklist for 1994 Fiat Punto
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Fiat Punto.
Frequently Asked Questions
Is a 1994 Fiat Punto likely to fail its MOT?
Based on DVSA statistics, the 1994 Fiat Punto has a 58.8% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1994 Fiat Punto?
The most common MOT failure reasons for a 1994 Fiat Punto are: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1994 Fiat Punto fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1994 Fiat Puntos fail their MOT?
Around 41% of 1994 Fiat Puntos fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a tyre seriously damaged and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1994 Fiat Punto MOT?
Before your 1994 Fiat Punto MOT, check these commonly-failed items: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1994 Fiat Punto reliable for MOT?
With a 58.8% MOT pass rate, the 1994 Fiat Punto performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.