DVSA Statistics
2012 Ford 350
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Ford 350 (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
40%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 2012 Ford 350
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 4
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford 350.
Frequently Asked Questions
Is a 2012 Ford 350 likely to fail its MOT?
Based on DVSA statistics, the 2012 Ford 350 has a 40% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2012 Ford 350?
The most common MOT failure reasons for a 2012 Ford 350 are: a suspension pin, bush or joint excessively worn, excessive fluctuation in brake effort through each wheel revolution., play in steering rack inner joint(s). Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Ford 350 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, excessive fluctuation in brake effort through each wheel revolution., play in steering rack inner joint(s). Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Ford 350s fail their MOT?
Around 60% of 2012 Ford 350s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and excessive fluctuation in brake effort through each wheel revolution.. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Ford 350 MOT?
Before your 2012 Ford 350 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, excessive fluctuation in brake effort through each wheel revolution., play in steering rack inner joint(s). Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Ford 350 reliable for MOT?
With a 40% MOT pass rate, the 2012 Ford 350 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.