DVSA Statistics
1997 Ford B
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Ford B (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1997 Ford B
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford B.
Frequently Asked Questions
Is a 1997 Ford B likely to fail its MOT?
Based on DVSA statistics, the 1997 Ford B has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1997 Ford B?
The most common MOT failure reasons for a 1997 Ford B are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected, parking brake efficiency below minimum requirement, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Ford B fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected, parking brake efficiency below minimum requirement, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Ford Bs fail their MOT?
Around 50% of 1997 Ford Bs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected and parking brake efficiency below minimum requirement. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Ford B MOT?
Before your 1997 Ford B MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected, parking brake efficiency below minimum requirement, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Ford B reliable for MOT?
With a 50% MOT pass rate, the 1997 Ford B performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.