DVSA Statistics
2009 Ford Bongo
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2009 Ford Bongo (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
58.3%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2009 Ford Bongo
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Bongo.
Frequently Asked Questions
Is a 2009 Ford Bongo likely to fail its MOT?
Based on DVSA statistics, the 2009 Ford Bongo has a 58.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2009 Ford Bongo?
The most common MOT failure reasons for a 2009 Ford Bongo are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2009 Ford Bongo fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2009 Ford Bongos fail their MOT?
Around 42% of 2009 Ford Bongos fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2009 Ford Bongo MOT?
Before your 2009 Ford Bongo MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2009 Ford Bongo reliable for MOT?
With a 58.3% MOT pass rate, the 2009 Ford Bongo performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.