DVSA Statistics
2005 Ford Conect
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 Ford Conect (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on CONECTs. Quick 5-minute fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2005 Ford Conect
Based on common failure points for this model, check these items before your MOT:
- 1
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Conect.
Frequently Asked Questions
Is a 2005 Ford Conect likely to fail its MOT?
Based on DVSA statistics, the 2005 Ford Conect has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2005 Ford Conect?
The most common MOT failure reasons for a 2005 Ford Conect are: a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources, wiper blade missing or obviously not clearing the windscreen, lamp emitted colour, position or intensity not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 Ford Conect fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources, wiper blade missing or obviously not clearing the windscreen, lamp emitted colour, position or intensity not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 Ford Conects fail their MOT?
Around 50% of 2005 Ford Conects fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources and wiper blade missing or obviously not clearing the windscreen. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 Ford Conect MOT?
Before your 2005 Ford Conect MOT, check these commonly-failed items: a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources, wiper blade missing or obviously not clearing the windscreen, lamp emitted colour, position or intensity not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 Ford Conect reliable for MOT?
With a 50% MOT pass rate, the 2005 Ford Conect performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.