Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Ford Escape
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Ford Escape (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

66.7%

Pass Rate

Based on 3 DVSA anonymised MOT tests · About this data

Pass Rate

66.7%

About average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    Lamp emitted colour, position or intensity not in accordance with the requirements

    40%
  2. 2

    A suspension pin, bush or joint excessively worn

    40%
  3. 3

    Front or rear fog lamp emitted colour, position or intensity not in accordance with the requirements

    10%
  4. 4

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    10%

Based on DVSA statistics from 3 recorded tests.

Pre-MOT Checklist for 2010 Ford Escape

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test front and rear fog lights work - check warning light on dashboard

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Escape.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Ford Escape likely to fail its MOT?

Based on DVSA statistics, the 2010 Ford Escape has a 66.7% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 2010 Ford Escape?

The most common MOT failure reasons for a 2010 Ford Escape are: lamp emitted colour, position or intensity not in accordance with the requirements, a suspension pin, bush or joint excessively worn, front or rear fog lamp emitted colour, position or intensity not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Ford Escape fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: lamp emitted colour, position or intensity not in accordance with the requirements, a suspension pin, bush or joint excessively worn, front or rear fog lamp emitted colour, position or intensity not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Ford Escapes fail their MOT?

Around 33% of 2010 Ford Escapes fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are lamp emitted colour, position or intensity not in accordance with the requirements and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Ford Escape MOT?

Before your 2010 Ford Escape MOT, check these commonly-failed items: lamp emitted colour, position or intensity not in accordance with the requirements, a suspension pin, bush or joint excessively worn, front or rear fog lamp emitted colour, position or intensity not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Ford Escape reliable for MOT?

With a 66.7% MOT pass rate, the 2010 Ford Escape performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.