DVSA Statistics
2010 Ford Freeda
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Ford Freeda (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 7 DVSA anonymised MOT tests · About this data
Pass Rate
71.4%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 7 recorded tests.
Pre-MOT Checklist for 2010 Ford Freeda
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Freeda.
Frequently Asked Questions
Is a 2010 Ford Freeda likely to fail its MOT?
Based on DVSA statistics, the 2010 Ford Freeda has a 71.4% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2010 Ford Freeda?
The most common MOT failure reasons for a 2010 Ford Freeda are: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Ford Freeda fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Ford Freedas fail their MOT?
Around 29% of 2010 Ford Freedas fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Ford Freeda MOT?
Before your 2010 Ford Freeda MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Ford Freeda reliable for MOT?
With a 71.4% MOT pass rate, the 2010 Ford Freeda performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.