DVSA Statistics
2010 Ford Hymer
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Ford Hymer (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
60%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 2010 Ford Hymer
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Hymer.
Frequently Asked Questions
Is a 2010 Ford Hymer likely to fail its MOT?
Based on DVSA statistics, the 2010 Ford Hymer has a 60% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2010 Ford Hymer?
The most common MOT failure reasons for a 2010 Ford Hymer are: a suspension pin, bush or joint excessively worn, actuator leaking and braking performance not affected, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Ford Hymer fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, actuator leaking and braking performance not affected, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Ford Hymers fail their MOT?
Around 40% of 2010 Ford Hymers fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and actuator leaking and braking performance not affected. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Ford Hymer MOT?
Before your 2010 Ford Hymer MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, actuator leaking and braking performance not affected, stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Ford Hymer reliable for MOT?
With a 60% MOT pass rate, the 2010 Ford Hymer performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.