DVSA Statistics
2008 Ford Montague
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2008 Ford Montague (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 5 DVSA anonymised MOT tests · About this data
Pass Rate
60%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 5 recorded tests.
Pre-MOT Checklist for 2008 Ford Montague
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Montague.
Frequently Asked Questions
Is a 2008 Ford Montague likely to fail its MOT?
Based on DVSA statistics, the 2008 Ford Montague has a 60% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2008 Ford Montague?
The most common MOT failure reasons for a 2008 Ford Montague are: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2008 Ford Montague fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2008 Ford Montagues fail their MOT?
Around 40% of 2008 Ford Montagues fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and a tyre seriously damaged. Pre-checking these items can significantly improve your chances.
What should I check before my 2008 Ford Montague MOT?
Before your 2008 Ford Montague MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2008 Ford Montague reliable for MOT?
With a 60% MOT pass rate, the 2008 Ford Montague performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.