DVSA Statistics
2007 Ford Mpv
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2007 Ford Mpv (only 11 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 11 DVSA anonymised MOT tests · About this data
Pass Rate
63.6%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 11 recorded tests.
Pre-MOT Checklist for 2007 Ford Mpv
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Mpv.
Frequently Asked Questions
Is a 2007 Ford Mpv likely to fail its MOT?
Based on DVSA statistics, the 2007 Ford Mpv has a 63.6% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2007 Ford Mpv?
The most common MOT failure reasons for a 2007 Ford Mpv are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2007 Ford Mpv fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2007 Ford Mpvs fail their MOT?
Around 36% of 2007 Ford Mpvs fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2007 Ford Mpv MOT?
Before your 2007 Ford Mpv MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2007 Ford Mpv reliable for MOT?
With a 63.6% MOT pass rate, the 2007 Ford Mpv performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.