DVSA Statistics
1990 Ford Orion
MOT Pass Rate & Pre-MOT Checklist
Used 1990 Ford Orions usually pass their MOT, but around 1 in 6 still fail, most often for a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and brake pipe damaged or excessively corroded. Based on 96 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 96 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 96 recorded tests.
Pre-MOT Checklist for 1990 Ford Orion
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Orion.
Frequently Asked Questions
Is a 1990 Ford Orion likely to fail its MOT?
Based on DVSA statistics, the 1990 Ford Orion has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1990 Ford Orion?
The most common MOT failure reasons for a 1990 Ford Orion are: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Ford Orion fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Ford Orions fail their MOT?
Around 17% of 1990 Ford Orions fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a tyre seriously damaged and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Ford Orion MOT?
Before your 1990 Ford Orion MOT, check these commonly-failed items: a tyre seriously damaged, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Ford Orion reliable for MOT?
With a 83.3% MOT pass rate, the 1990 Ford Orion performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.