DVSA Statistics
1992 Ford Orion
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Ford Orion (only 25 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 25 DVSA anonymised MOT tests · About this data
Pass Rate
76%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 25 recorded tests.
Pre-MOT Checklist for 1992 Ford Orion
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Orion.
Frequently Asked Questions
Is a 1992 Ford Orion likely to fail its MOT?
Based on DVSA statistics, the 1992 Ford Orion has a 76% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1992 Ford Orion?
The most common MOT failure reasons for a 1992 Ford Orion are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, emissions test unable to be completed. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Ford Orion fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, emissions test unable to be completed. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Ford Orions fail their MOT?
Around 24% of 1992 Ford Orions fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Ford Orion MOT?
Before your 1992 Ford Orion MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn, emissions test unable to be completed. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Ford Orion reliable for MOT?
With a 76% MOT pass rate, the 1992 Ford Orion performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.