DVSA Statistics
1991 Ford Sapphire
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1991 Ford Sapphire (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1991 Ford Sapphire
Based on common failure points for this model, check these items before your MOT:
- 1
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Sapphire.
Frequently Asked Questions
Is a 1991 Ford Sapphire likely to fail its MOT?
Based on DVSA statistics, the 1991 Ford Sapphire has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1991 Ford Sapphire?
The most common MOT failure reasons for a 1991 Ford Sapphire are: audible warning inoperative, indicator or hazard warning switch does not operate in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1991 Ford Sapphire fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: audible warning inoperative, indicator or hazard warning switch does not operate in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1991 Ford Sapphires fail their MOT?
Around 50% of 1991 Ford Sapphires fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are audible warning inoperative and indicator or hazard warning switch does not operate in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1991 Ford Sapphire MOT?
Before your 1991 Ford Sapphire MOT, check these commonly-failed items: audible warning inoperative, indicator or hazard warning switch does not operate in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1991 Ford Sapphire reliable for MOT?
With a 50% MOT pass rate, the 1991 Ford Sapphire performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.