DVSA Statistics
2010 Ford Tran 115 Tour T280s Trend
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Ford Tran 115 Tour T280s Trend (only 7 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 7 DVSA anonymised MOT tests · About this data
Pass Rate
57.1%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 7 recorded tests.
Pre-MOT Checklist for 2010 Ford Tran 115 Tour T280s Trend
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Tran 115 Tour T280s Trend.
Frequently Asked Questions
Is a 2010 Ford Tran 115 Tour T280s Trend likely to fail its MOT?
Based on DVSA statistics, the 2010 Ford Tran 115 Tour T280s Trend has a 57.1% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Ford Tran 115 Tour T280s Trend?
The most common MOT failure reasons for a 2010 Ford Tran 115 Tour T280s Trend are: brake disc or drum significantly and obviously worn, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Ford Tran 115 Tour T280s Trend fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake disc or drum significantly and obviously worn, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Ford Tran 115 Tour T280s Trends fail their MOT?
Around 43% of 2010 Ford Tran 115 Tour T280s Trends fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are brake disc or drum significantly and obviously worn and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Ford Tran 115 Tour T280s Trend MOT?
Before your 2010 Ford Tran 115 Tour T280s Trend MOT, check these commonly-failed items: brake disc or drum significantly and obviously worn, a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Ford Tran 115 Tour T280s Trend reliable for MOT?
With a 57.1% MOT pass rate, the 2010 Ford Tran 115 Tour T280s Trend performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.