DVSA Statistics
2010 Ford Transit Connect
MOT Pass Rate & Pre-MOT Checklist
Used 2010 Ford Transit Connects usually pass their MOT, but around 1 in 3 still fail, most often for brake pipe damaged or excessively corroded, tyre tread depth not in accordance with the requirements and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Based on 7,633 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 7,633 DVSA anonymised MOT tests · About this data
Pass Rate
68.5%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 7,633 recorded tests.
Pre-MOT Checklist for 2010 Ford Transit Connect
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Transit Connect.
Frequently Asked Questions
Is a 2010 Ford Transit Connect likely to fail its MOT?
Based on DVSA statistics, the 2010 Ford Transit Connect has a 68.5% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2010 Ford Transit Connect?
The most common MOT failure reasons for a 2010 Ford Transit Connect are: brake pipe damaged or excessively corroded, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Ford Transit Connect fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Ford Transit Connects fail their MOT?
Around 32% of 2010 Ford Transit Connects fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Ford Transit Connect MOT?
Before your 2010 Ford Transit Connect MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Ford Transit Connect reliable for MOT?
With a 68.5% MOT pass rate, the 2010 Ford Transit Connect performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.