Skip to content
MOTCHECK
Beta

DVSA Statistics

1968 Ford Zodiac
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1968 Ford Zodiac (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    Actuator leaking and braking performance not affected

    33.3%
  2. 2

    A suspension pin, bush or joint excessively worn

    33.3%
  3. 3

    Steering linkage retaining or locking device missing or ineffective

    33.3%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 1968 Ford Zodiac

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Ford Zodiac.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1968 Ford Zodiac likely to fail its MOT?

Based on DVSA statistics, the 1968 Ford Zodiac has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 1968 Ford Zodiac?

The most common MOT failure reasons for a 1968 Ford Zodiac are: actuator leaking and braking performance not affected, a suspension pin, bush or joint excessively worn, steering linkage retaining or locking device missing or ineffective. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1968 Ford Zodiac fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: actuator leaking and braking performance not affected, a suspension pin, bush or joint excessively worn, steering linkage retaining or locking device missing or ineffective. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1968 Ford Zodiacs fail their MOT?

Around 50% of 1968 Ford Zodiacs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are actuator leaking and braking performance not affected and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 1968 Ford Zodiac MOT?

Before your 1968 Ford Zodiac MOT, check these commonly-failed items: actuator leaking and braking performance not affected, a suspension pin, bush or joint excessively worn, steering linkage retaining or locking device missing or ineffective. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1968 Ford Zodiac reliable for MOT?

With a 50% MOT pass rate, the 1968 Ford Zodiac performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.