Skip to content
MOTCHECK
Beta

DVSA Statistics

2012 Honda 400
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2012 Honda 400 (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

0%

Pass Rate

Based on 1 DVSA anonymised MOT tests · About this data

Pass Rate

0%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

5 minutes fix
Save Money

Number plate lights are a quick fix.

Fixes:Number plate does not conform to the specified requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Number plate does not conform to the specified requirements

    16.7%
  2. 2

    Rate of flashing not between 60 and 120 times per minute

    16.7%
  3. 3

    Reflector missing or reflecting white to the rear

    16.7%
  4. 4

    A wheel excessively corroded, damaged or distorted

    16.7%
  5. 5

    Exhaust noise levels in excess of those permitted

    16.7%

Based on DVSA statistics from 1 recorded tests.

Pre-MOT Checklist for 2012 Honda 400

Based on common failure points for this model, check these items before your MOT:

  • 1

    Ensure number plate lights work and plates are clean and legible

    Lighting – Common fail on this model

  • 2

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda 400.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2012 Honda 400 likely to fail its MOT?

Based on DVSA statistics, the 2012 Honda 400 has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2012 Honda 400?

The most common MOT failure reasons for a 2012 Honda 400 are: number plate does not conform to the specified requirements, rate of flashing not between 60 and 120 times per minute, reflector missing or reflecting white to the rear. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2012 Honda 400 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: number plate does not conform to the specified requirements, rate of flashing not between 60 and 120 times per minute, reflector missing or reflecting white to the rear. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2012 Honda 400s fail their MOT?

Around 100% of 2012 Honda 400s fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are number plate does not conform to the specified requirements and rate of flashing not between 60 and 120 times per minute. Pre-checking these items can significantly improve your chances.

What should I check before my 2012 Honda 400 MOT?

Before your 2012 Honda 400 MOT, check these commonly-failed items: number plate does not conform to the specified requirements, rate of flashing not between 60 and 120 times per minute, reflector missing or reflecting white to the rear. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2012 Honda 400 reliable for MOT?

With a 0% MOT pass rate, the 2012 Honda 400 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.