DVSA Statistics
1998 Honda Beat
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1998 Honda Beat (only 15 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 15 DVSA anonymised MOT tests · About this data
Pass Rate
80%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on BEATs. Quick 5-minute fix.
Based on DVSA statistics from 15 recorded tests.
Pre-MOT Checklist for 1998 Honda Beat
Based on common failure points for this model, check these items before your MOT:
- 1
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 4
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Beat.
Frequently Asked Questions
Is a 1998 Honda Beat likely to fail its MOT?
Based on DVSA statistics, the 1998 Honda Beat has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1998 Honda Beat?
The most common MOT failure reasons for a 1998 Honda Beat are: steering rack gaiter or ball joint dust cover damaged or deteriorated, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, wiper blade missing or obviously not clearing the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Honda Beat fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: steering rack gaiter or ball joint dust cover damaged or deteriorated, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, wiper blade missing or obviously not clearing the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Honda Beats fail their MOT?
Around 20% of 1998 Honda Beats fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are steering rack gaiter or ball joint dust cover damaged or deteriorated and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Honda Beat MOT?
Before your 1998 Honda Beat MOT, check these commonly-failed items: steering rack gaiter or ball joint dust cover damaged or deteriorated, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, wiper blade missing or obviously not clearing the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Honda Beat reliable for MOT?
With a 80% MOT pass rate, the 1998 Honda Beat performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.