Skip to content
MOTCHECK
Beta

DVSA Statistics

2006 Honda Cb 125rs
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2006 Honda Cb 125rs (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

33.3%

Pass Rate

Based on 3 DVSA anonymised MOT tests · About this data

Pass Rate

33.3%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake control so positioned, bent or shortened that the brake cannot be readily applied.
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A transmission belt, chain, sprocket or pulley excessively loose or worn

    27.3%
  2. 2

    Brake control so positioned, bent or shortened that the brake cannot be readily applied.

    9.1%
  3. 3

    Any braking system component insecure or inadequately mounted

    9.1%
  4. 4

    Contaminated with oil, grease etc

    9.1%
  5. 5

    Brake lining or pad worn below 1.0mm

    9.1%

Based on DVSA statistics from 3 recorded tests.

Pre-MOT Checklist for 2006 Honda Cb 125rs

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Cb 125rs.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2006 Honda Cb 125rs likely to fail its MOT?

Based on DVSA statistics, the 2006 Honda Cb 125rs has a 33.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2006 Honda Cb 125rs?

The most common MOT failure reasons for a 2006 Honda Cb 125rs are: a transmission belt, chain, sprocket or pulley excessively loose or worn, brake control so positioned, bent or shortened that the brake cannot be readily applied., any braking system component insecure or inadequately mounted. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2006 Honda Cb 125rs fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a transmission belt, chain, sprocket or pulley excessively loose or worn, brake control so positioned, bent or shortened that the brake cannot be readily applied., any braking system component insecure or inadequately mounted. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2006 Honda Cb 125rss fail their MOT?

Around 67% of 2006 Honda Cb 125rss fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are a transmission belt, chain, sprocket or pulley excessively loose or worn and brake control so positioned, bent or shortened that the brake cannot be readily applied.. Pre-checking these items can significantly improve your chances.

What should I check before my 2006 Honda Cb 125rs MOT?

Before your 2006 Honda Cb 125rs MOT, check these commonly-failed items: a transmission belt, chain, sprocket or pulley excessively loose or worn, brake control so positioned, bent or shortened that the brake cannot be readily applied., any braking system component insecure or inadequately mounted. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2006 Honda Cb 125rs reliable for MOT?

With a 33.3% MOT pass rate, the 2006 Honda Cb 125rs performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.