Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Honda Cbr 1000 Rr-A
MOT Pass Rate & Pre-MOT Checklist

Used 2010 Honda Cbr 1000 Rr-As usually pass their MOT, but around 5% still fail, most often for a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted and brake lining or pad worn below 1.0mm. Based on 189 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

94.7%

Pass Rate

Based on 189 DVSA anonymised MOT tests · About this data

Pass Rate

94.7%

Higher than average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake lining or pad worn below 1.0mm
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A shock absorber not functioning or leaking severely

    21.7%
  2. 2

    Exhaust noise levels in excess of those permitted

    13%
  3. 3

    Brake lining or pad worn below 1.0mm

    8.7%
  4. 4

    A wheel bearing so rough it is likely to overheat or break up

    8.7%
  5. 5

    Restriction in free movement of the braking system

    4.3%

Based on DVSA statistics from 189 recorded tests.

Pre-MOT Checklist for 2010 Honda Cbr 1000 Rr-A

Based on common failure points for this model, check these items before your MOT:

  • 1

    Push down on each corner and release - car should bounce once only

    Suspension – Common fail on this model

  • 2

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 3

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 189 MOT tests from the 2023 DVSA dataset. Your 2010 Honda Cbr 1000 Rr-A was 13 years old when this data was collected and is now 16 years old.

Sample Size

Moderate confidence - 189 tests (interpret with caution)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Cbr 1000 Rr-A.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Honda Cbr 1000 Rr-A likely to fail its MOT?

Based on DVSA statistics, the 2010 Honda Cbr 1000 Rr-A has a 94.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Honda Cbr 1000 Rr-A?

The most common MOT failure reasons for a 2010 Honda Cbr 1000 Rr-A are: a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted, brake lining or pad worn below 1.0mm. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Honda Cbr 1000 Rr-A fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted, brake lining or pad worn below 1.0mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Honda Cbr 1000 Rr-As fail their MOT?

Around 5% of 2010 Honda Cbr 1000 Rr-As fail their MOT test, meaning roughly 1 in 20 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and exhaust noise levels in excess of those permitted. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Honda Cbr 1000 Rr-A MOT?

Before your 2010 Honda Cbr 1000 Rr-A MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, exhaust noise levels in excess of those permitted, brake lining or pad worn below 1.0mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Honda Cbr 1000 Rr-A reliable for MOT?

With a 94.7% MOT pass rate, the 2010 Honda Cbr 1000 Rr-A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.