DVSA Statistics
2010 Honda Crf450r
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Honda Crf450r (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2010 Honda Crf450r
Based on common failure points for this model, check these items before your MOT:
- 1
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 2
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Crf450r.
Frequently Asked Questions
Is a 2010 Honda Crf450r likely to fail its MOT?
Based on DVSA statistics, the 2010 Honda Crf450r has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Honda Crf450r?
The most common MOT failure reasons for a 2010 Honda Crf450r are: a shock absorber not functioning or leaking severely, a drive chain horseshoe locking device incorrectly fitted, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Honda Crf450r fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, a drive chain horseshoe locking device incorrectly fitted, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Honda Crf450rs fail their MOT?
Around 50% of 2010 Honda Crf450rs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and a drive chain horseshoe locking device incorrectly fitted. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Honda Crf450r MOT?
Before your 2010 Honda Crf450r MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, a drive chain horseshoe locking device incorrectly fitted, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Honda Crf450r reliable for MOT?
With a 50% MOT pass rate, the 2010 Honda Crf450r performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.