DVSA Statistics
2010 Honda Elysion
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Honda Elysion (only 37 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 37 DVSA anonymised MOT tests · About this data
Pass Rate
86.5%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 37 recorded tests.
Pre-MOT Checklist for 2010 Honda Elysion
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 2
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Elysion.
Frequently Asked Questions
Is a 2010 Honda Elysion likely to fail its MOT?
Based on DVSA statistics, the 2010 Honda Elysion has a 86.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Honda Elysion?
The most common MOT failure reasons for a 2010 Honda Elysion are: emission control equipment fitted by the manufacturer missing, obviously modified or obviously defective, windscreen washers not working or not providing sufficient fluid to clear the windscreen, a brake lining or pad worn below 1.5mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Honda Elysion fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: emission control equipment fitted by the manufacturer missing, obviously modified or obviously defective, windscreen washers not working or not providing sufficient fluid to clear the windscreen, a brake lining or pad worn below 1.5mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Honda Elysions fail their MOT?
Around 14% of 2010 Honda Elysions fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are emission control equipment fitted by the manufacturer missing, obviously modified or obviously defective and windscreen washers not working or not providing sufficient fluid to clear the windscreen. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Honda Elysion MOT?
Before your 2010 Honda Elysion MOT, check these commonly-failed items: emission control equipment fitted by the manufacturer missing, obviously modified or obviously defective, windscreen washers not working or not providing sufficient fluid to clear the windscreen, a brake lining or pad worn below 1.5mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Honda Elysion reliable for MOT?
With a 86.5% MOT pass rate, the 2010 Honda Elysion performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.