DVSA Statistics
2006 Honda Integra
MOT Pass Rate & Pre-MOT Checklist
Used 2006 Honda Integras usually pass their MOT, but around 1 in 7 still fail, most often for a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured and tyre tread depth not in accordance with the requirements. Based on 76 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 76 DVSA anonymised MOT tests · About this data
Pass Rate
85.5%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 76 recorded tests.
Pre-MOT Checklist for 2006 Honda Integra
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Integra.
Frequently Asked Questions
Is a 2006 Honda Integra likely to fail its MOT?
Based on DVSA statistics, the 2006 Honda Integra has a 85.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2006 Honda Integra?
The most common MOT failure reasons for a 2006 Honda Integra are: a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Honda Integra fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Honda Integras fail their MOT?
Around 15% of 2006 Honda Integras fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and brake disc or drum excessively weakened, insecure or fractured. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Honda Integra MOT?
Before your 2006 Honda Integra MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Honda Integra reliable for MOT?
With a 85.5% MOT pass rate, the 2006 Honda Integra performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.