DVSA Statistics
2011 Honda Integra
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2011 Honda Integra (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
88.2%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 2011 Honda Integra
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 4
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Integra.
Frequently Asked Questions
Is a 2011 Honda Integra likely to fail its MOT?
Based on DVSA statistics, the 2011 Honda Integra has a 88.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2011 Honda Integra?
The most common MOT failure reasons for a 2011 Honda Integra are: a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded, a steering ball joint with excessive wear or free play. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2011 Honda Integra fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded, a steering ball joint with excessive wear or free play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2011 Honda Integras fail their MOT?
Around 12% of 2011 Honda Integras fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and brake pipe damaged or excessively corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 2011 Honda Integra MOT?
Before your 2011 Honda Integra MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, brake pipe damaged or excessively corroded, a steering ball joint with excessive wear or free play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2011 Honda Integra reliable for MOT?
With a 88.2% MOT pass rate, the 2011 Honda Integra performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.