DVSA Statistics
2001 Honda Logo
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2001 Honda Logo (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 10 DVSA anonymised MOT tests · About this data
Pass Rate
60%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 10 recorded tests.
Pre-MOT Checklist for 2001 Honda Logo
Based on common failure points for this model, check these items before your MOT:
- 1
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Logo.
Frequently Asked Questions
Is a 2001 Honda Logo likely to fail its MOT?
Based on DVSA statistics, the 2001 Honda Logo has a 60% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2001 Honda Logo?
The most common MOT failure reasons for a 2001 Honda Logo are: exhaust system leaking or insecure, headlamp reflector or lens slightly defective, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2001 Honda Logo fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: exhaust system leaking or insecure, headlamp reflector or lens slightly defective, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2001 Honda Logos fail their MOT?
Around 40% of 2001 Honda Logos fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are exhaust system leaking or insecure and headlamp reflector or lens slightly defective. Pre-checking these items can significantly improve your chances.
What should I check before my 2001 Honda Logo MOT?
Before your 2001 Honda Logo MOT, check these commonly-failed items: exhaust system leaking or insecure, headlamp reflector or lens slightly defective, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2001 Honda Logo reliable for MOT?
With a 60% MOT pass rate, the 2001 Honda Logo performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.