DVSA Statistics
1998 Honda Orthia
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1998 Honda Orthia (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on ORTHIAs. Quick 5-minute fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1998 Honda Orthia
Based on common failure points for this model, check these items before your MOT:
- 1
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
- 4
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Orthia.
Frequently Asked Questions
Is a 1998 Honda Orthia likely to fail its MOT?
Based on DVSA statistics, the 1998 Honda Orthia has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1998 Honda Orthia?
The most common MOT failure reasons for a 1998 Honda Orthia are: wiper blade missing or obviously not clearing the windscreen, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Honda Orthia fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: wiper blade missing or obviously not clearing the windscreen, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Honda Orthias fail their MOT?
Around 50% of 1998 Honda Orthias fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are wiper blade missing or obviously not clearing the windscreen and product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Honda Orthia MOT?
Before your 1998 Honda Orthia MOT, check these commonly-failed items: wiper blade missing or obviously not clearing the windscreen, product on the lens or light source which obviously reduces light intensity or changes emitted colour to other than white or yellow, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Honda Orthia reliable for MOT?
With a 50% MOT pass rate, the 1998 Honda Orthia performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.