Skip to content
MOTCHECK
Beta

DVSA Statistics

1986 Honda Prelude
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1986 Honda Prelude (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

87.5%

Pass Rate

Based on 8 DVSA anonymised MOT tests · About this data

Pass Rate

87.5%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension pin, bush or joint excessively worn

    22.2%
  2. 2

    A shock absorber which has negligible damping effect

    22.2%
  3. 3

    Vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced

    22.2%
  4. 4

    A battery insecure but not likely to fall from carrier

    11.1%
  5. 5

    A wheel bearing with excessive play

    11.1%

Based on DVSA statistics from 8 recorded tests.

Pre-MOT Checklist for 1986 Honda Prelude

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Prelude.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1986 Honda Prelude likely to fail its MOT?

Based on DVSA statistics, the 1986 Honda Prelude has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1986 Honda Prelude?

The most common MOT failure reasons for a 1986 Honda Prelude are: a suspension pin, bush or joint excessively worn, a shock absorber which has negligible damping effect, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1986 Honda Prelude fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a shock absorber which has negligible damping effect, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1986 Honda Preludes fail their MOT?

Around 13% of 1986 Honda Preludes fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a shock absorber which has negligible damping effect. Pre-checking these items can significantly improve your chances.

What should I check before my 1986 Honda Prelude MOT?

Before your 1986 Honda Prelude MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a shock absorber which has negligible damping effect, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1986 Honda Prelude reliable for MOT?

With a 87.5% MOT pass rate, the 1986 Honda Prelude performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.