DVSA Statistics
2003 Honda Ses125
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2003 Honda Ses125 (only 46 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 46 DVSA anonymised MOT tests · About this data
Pass Rate
91.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 46 recorded tests.
Pre-MOT Checklist for 2003 Honda Ses125
Based on common failure points for this model, check these items before your MOT:
- 1
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Check rear reflectors are present, clean, and not cracked
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Ses125.
Frequently Asked Questions
Is a 2003 Honda Ses125 likely to fail its MOT?
Based on DVSA statistics, the 2003 Honda Ses125 has a 91.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2003 Honda Ses125?
The most common MOT failure reasons for a 2003 Honda Ses125 are: steering head bearings have excessive wear or play, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced, a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2003 Honda Ses125 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: steering head bearings have excessive wear or play, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced, a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2003 Honda Ses125s fail their MOT?
Around 9% of 2003 Honda Ses125s fail their MOT test, meaning roughly 1 in 11 don't pass first time. The most common reasons are steering head bearings have excessive wear or play and a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.
What should I check before my 2003 Honda Ses125 MOT?
Before your 2003 Honda Ses125 MOT, check these commonly-failed items: steering head bearings have excessive wear or play, a main load-bearing structural member corroded to the extent that the rigidity of the assembly is seriously reduced, a tyre with a lump, bulge or tear caused by separation or partial failure of its structure, including any lifting of the tread rubber. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2003 Honda Ses125 reliable for MOT?
With a 91.3% MOT pass rate, the 2003 Honda Ses125 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.