DVSA Statistics
2010 Honda Sh 125 A
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Honda Sh 125 A (only 38 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 38 DVSA anonymised MOT tests · About this data
Pass Rate
92.1%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 38 recorded tests.
Pre-MOT Checklist for 2010 Honda Sh 125 A
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Sh 125 A.
Frequently Asked Questions
Is a 2010 Honda Sh 125 A likely to fail its MOT?
Based on DVSA statistics, the 2010 Honda Sh 125 A has a 92.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Honda Sh 125 A?
The most common MOT failure reasons for a 2010 Honda Sh 125 A are: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, on a motorcycle with two front or rear wheels, there is no recorded brake effort at a wheel, brake efficiency below minimum requirement. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Honda Sh 125 A fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, on a motorcycle with two front or rear wheels, there is no recorded brake effort at a wheel, brake efficiency below minimum requirement. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Honda Sh 125 As fail their MOT?
Around 8% of 2010 Honda Sh 125 As fail their MOT test, meaning roughly 1 in 13 don't pass first time. The most common reasons are a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps and on a motorcycle with two front or rear wheels, there is no recorded brake effort at a wheel. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Honda Sh 125 A MOT?
Before your 2010 Honda Sh 125 A MOT, check these commonly-failed items: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, on a motorcycle with two front or rear wheels, there is no recorded brake effort at a wheel, brake efficiency below minimum requirement. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Honda Sh 125 A reliable for MOT?
With a 92.1% MOT pass rate, the 2010 Honda Sh 125 A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.