DVSA Statistics
2006 Honda Truck
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2006 Honda Truck (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2006 Honda Truck
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Truck.
Frequently Asked Questions
Is a 2006 Honda Truck likely to fail its MOT?
Based on DVSA statistics, the 2006 Honda Truck has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2006 Honda Truck?
The most common MOT failure reasons for a 2006 Honda Truck are: a brake lining or pad worn below 1.5mm, nail in tyre, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Honda Truck fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad worn below 1.5mm, nail in tyre, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Honda Trucks fail their MOT?
Around 50% of 2006 Honda Trucks fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a brake lining or pad worn below 1.5mm and nail in tyre. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Honda Truck MOT?
Before your 2006 Honda Truck MOT, check these commonly-failed items: a brake lining or pad worn below 1.5mm, nail in tyre, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Honda Truck reliable for MOT?
With a 50% MOT pass rate, the 2006 Honda Truck performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.