Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Honda Trx
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Honda Trx (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

87.5%

Pass Rate

Based on 8 DVSA anonymised MOT tests · About this data

Pass Rate

87.5%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A wheel bearing with excessive play

    50%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected

    50%

Based on DVSA statistics from 8 recorded tests.

Pre-MOT Checklist for 2010 Honda Trx

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Trx.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Honda Trx likely to fail its MOT?

Based on DVSA statistics, the 2010 Honda Trx has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Honda Trx?

The most common MOT failure reasons for a 2010 Honda Trx are: a wheel bearing with excessive play, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Honda Trx fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a wheel bearing with excessive play, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Honda Trxs fail their MOT?

Around 13% of 2010 Honda Trxs fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a wheel bearing with excessive play and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Honda Trx MOT?

Before your 2010 Honda Trx MOT, check these commonly-failed items: a wheel bearing with excessive play, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Honda Trx reliable for MOT?

With a 87.5% MOT pass rate, the 2010 Honda Trx performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.