DVSA Statistics
2012 Honda Ww
MOT Pass Rate & Pre-MOT Checklist
Used 2012 Honda Wws usually pass their MOT, but around 1 in 8 still fail, most often for a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm and a shock absorber not functioning or leaking severely. Based on 50 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 50 DVSA anonymised MOT tests · About this data
Pass Rate
88%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 50 recorded tests.
Pre-MOT Checklist for 2012 Honda Ww
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 3
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Honda Ww.
Frequently Asked Questions
Is a 2012 Honda Ww likely to fail its MOT?
Based on DVSA statistics, the 2012 Honda Ww has a 88% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 Honda Ww?
The most common MOT failure reasons for a 2012 Honda Ww are: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm, a shock absorber not functioning or leaking severely. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Honda Ww fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm, a shock absorber not functioning or leaking severely. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Honda Wws fail their MOT?
Around 12% of 2012 Honda Wws fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps and brake lining or pad worn below 1.0mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Honda Ww MOT?
Before your 2012 Honda Ww MOT, check these commonly-failed items: a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, brake lining or pad worn below 1.0mm, a shock absorber not functioning or leaking severely. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Honda Ww reliable for MOT?
With a 88% MOT pass rate, the 2012 Honda Ww performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.