DVSA Statistics
2012 Husaberg Fe 390 Enduro
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Husaberg Fe 390 Enduro (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2012 Husaberg Fe 390 Enduro
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Husaberg Fe 390 Enduro.
Frequently Asked Questions
Is a 2012 Husaberg Fe 390 Enduro likely to fail its MOT?
Based on DVSA statistics, the 2012 Husaberg Fe 390 Enduro has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2012 Husaberg Fe 390 Enduro?
The most common MOT failure reasons for a 2012 Husaberg Fe 390 Enduro are: lamp emitted colour, position or intensity not in accordance with the requirements, number plate does not conform to the specified requirements, reflector missing or reflecting white to the rear. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Husaberg Fe 390 Enduro fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: lamp emitted colour, position or intensity not in accordance with the requirements, number plate does not conform to the specified requirements, reflector missing or reflecting white to the rear. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Husaberg Fe 390 Enduros fail their MOT?
Around 50% of 2012 Husaberg Fe 390 Enduros fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are lamp emitted colour, position or intensity not in accordance with the requirements and number plate does not conform to the specified requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Husaberg Fe 390 Enduro MOT?
Before your 2012 Husaberg Fe 390 Enduro MOT, check these commonly-failed items: lamp emitted colour, position or intensity not in accordance with the requirements, number plate does not conform to the specified requirements, reflector missing or reflecting white to the rear. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Husaberg Fe 390 Enduro reliable for MOT?
With a 50% MOT pass rate, the 2012 Husaberg Fe 390 Enduro performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.