DVSA Statistics
2010 Husaberg Fe450e
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Husaberg Fe450e (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
75%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 2010 Husaberg Fe450e
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Husaberg Fe450e.
Frequently Asked Questions
Is a 2010 Husaberg Fe450e likely to fail its MOT?
Based on DVSA statistics, the 2010 Husaberg Fe450e has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Husaberg Fe450e?
The most common MOT failure reasons for a 2010 Husaberg Fe450e are: number plate does not conform to the specified requirements, a tyre incorrectly seated on the wheel rim, a wheel bearing play so excessive it is likely to break up or directional control impaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Husaberg Fe450e fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: number plate does not conform to the specified requirements, a tyre incorrectly seated on the wheel rim, a wheel bearing play so excessive it is likely to break up or directional control impaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Husaberg Fe450es fail their MOT?
Around 25% of 2010 Husaberg Fe450es fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are number plate does not conform to the specified requirements and a tyre incorrectly seated on the wheel rim. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Husaberg Fe450e MOT?
Before your 2010 Husaberg Fe450e MOT, check these commonly-failed items: number plate does not conform to the specified requirements, a tyre incorrectly seated on the wheel rim, a wheel bearing play so excessive it is likely to break up or directional control impaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Husaberg Fe450e reliable for MOT?
With a 75% MOT pass rate, the 2010 Husaberg Fe450e performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.