DVSA Statistics
2020 Husqvarna Fe 350 2020
MOT Pass Rate & Pre-MOT Checklist
Used 2020 Husqvarna Fe 350 2020s usually pass their MOT, but around 5% still fail, most often for projected beam image is obviously incorrect, a shock absorber not functioning or leaking severely and a spoke missing, cracked, excessively loose, bent or corroded. Based on 63 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 63 DVSA anonymised MOT tests · About this data
Pass Rate
95.2%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 63 recorded tests.
Pre-MOT Checklist for 2020 Husqvarna Fe 350 2020
Based on common failure points for this model, check these items before your MOT:
- 1
Check headlight beam pattern and alignment against a wall
Lighting – Common fail on this model
- 2
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Husqvarna Fe 350 2020.
Frequently Asked Questions
Is a 2020 Husqvarna Fe 350 2020 likely to fail its MOT?
Based on DVSA statistics, the 2020 Husqvarna Fe 350 2020 has a 95.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2020 Husqvarna Fe 350 2020?
The most common MOT failure reasons for a 2020 Husqvarna Fe 350 2020 are: projected beam image is obviously incorrect, a shock absorber not functioning or leaking severely, a spoke missing, cracked, excessively loose, bent or corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2020 Husqvarna Fe 350 2020 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: projected beam image is obviously incorrect, a shock absorber not functioning or leaking severely, a spoke missing, cracked, excessively loose, bent or corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2020 Husqvarna Fe 350 2020s fail their MOT?
Around 5% of 2020 Husqvarna Fe 350 2020s fail their MOT test, meaning roughly 1 in 20 don't pass first time. The most common reasons are projected beam image is obviously incorrect and a shock absorber not functioning or leaking severely. Pre-checking these items can significantly improve your chances.
What should I check before my 2020 Husqvarna Fe 350 2020 MOT?
Before your 2020 Husqvarna Fe 350 2020 MOT, check these commonly-failed items: projected beam image is obviously incorrect, a shock absorber not functioning or leaking severely, a spoke missing, cracked, excessively loose, bent or corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2020 Husqvarna Fe 350 2020 reliable for MOT?
With a 95.2% MOT pass rate, the 2020 Husqvarna Fe 350 2020 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.