DVSA Statistics
2000 Husqvarna Te610e
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Husqvarna Te610e (only 9 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 9 DVSA anonymised MOT tests · About this data
Pass Rate
77.8%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 9 recorded tests.
Pre-MOT Checklist for 2000 Husqvarna Te610e
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check rear reflectors are present, clean, and not cracked
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Husqvarna Te610e.
Frequently Asked Questions
Is a 2000 Husqvarna Te610e likely to fail its MOT?
Based on DVSA statistics, the 2000 Husqvarna Te610e has a 77.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2000 Husqvarna Te610e?
The most common MOT failure reasons for a 2000 Husqvarna Te610e are: brake lining or pad missing or incorrectly mounted, reflector missing or reflecting white to the rear, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Husqvarna Te610e fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake lining or pad missing or incorrectly mounted, reflector missing or reflecting white to the rear, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Husqvarna Te610es fail their MOT?
Around 22% of 2000 Husqvarna Te610es fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are brake lining or pad missing or incorrectly mounted and reflector missing or reflecting white to the rear. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Husqvarna Te610e MOT?
Before your 2000 Husqvarna Te610e MOT, check these commonly-failed items: brake lining or pad missing or incorrectly mounted, reflector missing or reflecting white to the rear, a stop lamp(s) does not illuminate by the operation of both brake controls or remains on when the brakes are released. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Husqvarna Te610e reliable for MOT?
With a 77.8% MOT pass rate, the 2000 Husqvarna Te610e performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.