DVSA Statistics
2013 Hymer Unclassified
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2013 Hymer Unclassified (only 27 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 27 DVSA anonymised MOT tests · About this data
Pass Rate
88.9%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on UNCLASSIFIEDs. Quick 5-minute fix.
Based on DVSA statistics from 27 recorded tests.
Pre-MOT Checklist for 2013 Hymer Unclassified
Based on common failure points for this model, check these items before your MOT:
- 1
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Hymer Unclassified.
Frequently Asked Questions
Is a 2013 Hymer Unclassified likely to fail its MOT?
Based on DVSA statistics, the 2013 Hymer Unclassified has a 88.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2013 Hymer Unclassified?
The most common MOT failure reasons for a 2013 Hymer Unclassified are: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a shock absorber which has negligible damping effect. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2013 Hymer Unclassified fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a shock absorber which has negligible damping effect. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2013 Hymer Unclassifieds fail their MOT?
Around 11% of 2013 Hymer Unclassifieds fail their MOT test, meaning roughly 1 in 9 don't pass first time. The most common reasons are a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning and a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Pre-checking these items can significantly improve your chances.
What should I check before my 2013 Hymer Unclassified MOT?
Before your 2013 Hymer Unclassified MOT, check these commonly-failed items: a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a shock absorber which has negligible damping effect. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2013 Hymer Unclassified reliable for MOT?
With a 88.9% MOT pass rate, the 2013 Hymer Unclassified performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.