DVSA Statistics
2019 Hyundai Tucson Prem Se 48v Mhev Crdi A
MOT Pass Rate & Pre-MOT Checklist
Used 2019 Hyundai Tucson Prem Se 48v Mhev Crdi As usually pass their MOT, but around 7% still fail, most often for tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn and a brake lining or pad worn below 1.5mm. Based on 86 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 86 DVSA anonymised MOT tests · About this data
Pass Rate
93%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 86 recorded tests.
Pre-MOT Checklist for 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 5
Test front and rear fog lights work - check warning light on dashboard
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Hyundai Tucson Prem Se 48v Mhev Crdi A.
Frequently Asked Questions
Is a 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A likely to fail its MOT?
Based on DVSA statistics, the 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A has a 93% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A?
The most common MOT failure reasons for a 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A are: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2019 Hyundai Tucson Prem Se 48v Mhev Crdi As fail their MOT?
Around 7% of 2019 Hyundai Tucson Prem Se 48v Mhev Crdi As fail their MOT test, meaning roughly 1 in 14 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A MOT?
Before your 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, a suspension pin, bush or joint excessively worn, a brake lining or pad worn below 1.5mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A reliable for MOT?
With a 93% MOT pass rate, the 2019 Hyundai Tucson Prem Se 48v Mhev Crdi A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.