DVSA Statistics
2010 Infiniti M
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Infiniti M (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2010 Infiniti M
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Infiniti M.
Frequently Asked Questions
Is a 2010 Infiniti M likely to fail its MOT?
Based on DVSA statistics, the 2010 Infiniti M has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Infiniti M?
The most common MOT failure reasons for a 2010 Infiniti M are: brake disc or drum excessively weakened, insecure or fractured, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Infiniti M fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake disc or drum excessively weakened, insecure or fractured, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Infiniti Ms fail their MOT?
Around 17% of 2010 Infiniti Ms fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are brake disc or drum excessively weakened, insecure or fractured and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Infiniti M MOT?
Before your 2010 Infiniti M MOT, check these commonly-failed items: brake disc or drum excessively weakened, insecure or fractured, a suspension pin, bush or joint excessively worn, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Infiniti M reliable for MOT?
With a 83.3% MOT pass rate, the 2010 Infiniti M performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.