DVSA Statistics
2005 Isuzu Bighorn
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 Isuzu Bighorn (only 32 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 32 DVSA anonymised MOT tests · About this data
Pass Rate
59.4%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 32 recorded tests.
Pre-MOT Checklist for 2005 Isuzu Bighorn
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Isuzu Bighorn.
Frequently Asked Questions
Is a 2005 Isuzu Bighorn likely to fail its MOT?
Based on DVSA statistics, the 2005 Isuzu Bighorn has a 59.4% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2005 Isuzu Bighorn?
The most common MOT failure reasons for a 2005 Isuzu Bighorn are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 Isuzu Bighorn fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 Isuzu Bighorns fail their MOT?
Around 41% of 2005 Isuzu Bighorns fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 Isuzu Bighorn MOT?
Before your 2005 Isuzu Bighorn MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 Isuzu Bighorn reliable for MOT?
With a 59.4% MOT pass rate, the 2005 Isuzu Bighorn performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.