Skip to content
MOTCHECK
Beta

DVSA Statistics

2012 Isuzu D-Max Eiger D/c Intcooler Td A
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2012 Isuzu D-Max Eiger D/c Intcooler Td A (only 16 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

87.5%

Pass Rate

Based on 16 DVSA anonymised MOT tests · About this data

Pass Rate

87.5%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Brake light bulbs are easy to replace yourself.

Fixes:Stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A suspension pin, bush or joint excessively worn

    33.3%
  2. 2

    An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning

    16.7%
  3. 3

    A rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources

    16.7%
  4. 4

    Stop lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning

    16.7%
  5. 5

    A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning

    16.7%

Based on DVSA statistics from 16 recorded tests.

Pre-MOT Checklist for 2012 Isuzu D-Max Eiger D/c Intcooler Td A

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test front and rear fog lights work - check warning light on dashboard

    Lighting – Common fail on this model

How Does This Compare to Other Years?

See how this 2012 model compares to the next model year.

Why Trust This Data?

Official UK Government Source

This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.

Understanding the Statistics

This page is based on 16 MOT tests from the 2023 DVSA dataset. Your 2012 Isuzu D-Max Eiger D/c Intcooler Td A was 11 years old when this data was collected and is now 14 years old.

Sample Size

Limited data - 16 tests (use as rough guide only)

Limitations

Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Isuzu D-Max Eiger D/c Intcooler Td A.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2012 Isuzu D-Max Eiger D/c Intcooler Td A likely to fail its MOT?

Based on DVSA statistics, the 2012 Isuzu D-Max Eiger D/c Intcooler Td A has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2012 Isuzu D-Max Eiger D/c Intcooler Td A?

The most common MOT failure reasons for a 2012 Isuzu D-Max Eiger D/c Intcooler Td A are: a suspension pin, bush or joint excessively worn, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2012 Isuzu D-Max Eiger D/c Intcooler Td A fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2012 Isuzu D-Max Eiger D/c Intcooler Td As fail their MOT?

Around 13% of 2012 Isuzu D-Max Eiger D/c Intcooler Td As fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Pre-checking these items can significantly improve your chances.

What should I check before my 2012 Isuzu D-Max Eiger D/c Intcooler Td A MOT?

Before your 2012 Isuzu D-Max Eiger D/c Intcooler Td A MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2012 Isuzu D-Max Eiger D/c Intcooler Td A reliable for MOT?

With a 87.5% MOT pass rate, the 2012 Isuzu D-Max Eiger D/c Intcooler Td A performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.