4 Model Years Analyzed
Isuzu Piazza
MOT Pass Rate & Statistics
Average pass rate across all model years (1987-2002), based on 12 DVSA recorded tests.
83.3%
Average Pass Rate
4
Model Years
0k
Tests Analyzed
Most Tested Year
1989 Isuzu Piazza MOT Pass Rate & Common Failures
Pass Rate by Year
Most Common Failures Across All Years
- 1A suspension component excessively damaged or corroded
- 2A suspension pin, bush or joint excessively worn
- 3Contaminated with oil, grease etc
- 4The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired
- 5A battery insecure but not likely to fall from carrier
Check Your Isuzu Piazza
Enter your registration to see your specific vehicle's MOT history and personalized risk assessment.
Frequently Asked Questions
What is the average MOT pass rate for a Isuzu Piazza?
The Isuzu Piazza has an average 83.3% MOT pass rate across model years 1987 to 2002, based on DVSA test data.
What are the most common MOT failures on a Isuzu Piazza?
The most common MOT failure reasons for the Isuzu Piazza across all years are: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, contaminated with oil, grease etc. These are typical wear items that can often be checked and addressed before your test.
Which Isuzu Piazza year has the best MOT pass rate?
MOT pass rates vary by year - newer models typically have higher pass rates. Check our year-by-year breakdown above to compare pass rates for specific Isuzu Piazza model years.