DVSA Statistics
2010 Isuzu V Cross
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Isuzu V Cross (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2010 Isuzu V Cross
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Isuzu V Cross.
Frequently Asked Questions
Is a 2010 Isuzu V Cross likely to fail its MOT?
Based on DVSA statistics, the 2010 Isuzu V Cross has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Isuzu V Cross?
The most common MOT failure reasons for a 2010 Isuzu V Cross are: a brake hose ferrule excessively corroded, exhaust system leaking or insecure, emissions test unable to be completed. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Isuzu V Cross fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake hose ferrule excessively corroded, exhaust system leaking or insecure, emissions test unable to be completed. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Isuzu V Crosss fail their MOT?
Around 50% of 2010 Isuzu V Crosss fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a brake hose ferrule excessively corroded and exhaust system leaking or insecure. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Isuzu V Cross MOT?
Before your 2010 Isuzu V Cross MOT, check these commonly-failed items: a brake hose ferrule excessively corroded, exhaust system leaking or insecure, emissions test unable to be completed. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Isuzu V Cross reliable for MOT?
With a 50% MOT pass rate, the 2010 Isuzu V Cross performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.