DVSA Statistics
1997 Iveco Ford Camper
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Iveco Ford Camper (only 6 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 6 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 6 recorded tests.
Pre-MOT Checklist for 1997 Iveco Ford Camper
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco Ford Camper.
Frequently Asked Questions
Is a 1997 Iveco Ford Camper likely to fail its MOT?
Based on DVSA statistics, the 1997 Iveco Ford Camper has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1997 Iveco Ford Camper?
The most common MOT failure reasons for a 1997 Iveco Ford Camper are: tyre tread depth not in accordance with the requirements, parking brake efficiency below minimum requirement, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Iveco Ford Camper fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, parking brake efficiency below minimum requirement, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Iveco Ford Campers fail their MOT?
Around 50% of 1997 Iveco Ford Campers fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and parking brake efficiency below minimum requirement. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Iveco Ford Camper MOT?
Before your 1997 Iveco Ford Camper MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, parking brake efficiency below minimum requirement, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Iveco Ford Camper reliable for MOT?
With a 50% MOT pass rate, the 1997 Iveco Ford Camper performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.