DVSA Statistics
1995 Iveco 35.10 Swb
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1995 Iveco 35.10 Swb (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 3 DVSA anonymised MOT tests · About this data
Pass Rate
33.3%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 3 recorded tests.
Pre-MOT Checklist for 1995 Iveco 35.10 Swb
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
How Does This Compare to Other Years?
Previous Year
1994 Iveco 35.10 Swb
Based on 4 UK MOT tests
Next Year
1996 Iveco 35.10 Swb
Based on 7 UK MOT tests
Compare how MOT performance varies across Iveco 35.10 Swb model years.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 3 MOT tests from the 2023 DVSA dataset. Your 1995 Iveco 35.10 Swb was 28 years old when this data was collected and is now 31 years old.
Sample Size
Limited data - 3 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Iveco 35.10 Swb.
Frequently Asked Questions
Is a 1995 Iveco 35.10 Swb likely to fail its MOT?
Based on DVSA statistics, the 1995 Iveco 35.10 Swb has a 33.3% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1995 Iveco 35.10 Swb?
The most common MOT failure reasons for a 1995 Iveco 35.10 Swb are: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, body, cab or chassis excessively corroded at a mounting point, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1995 Iveco 35.10 Swb fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, body, cab or chassis excessively corroded at a mounting point, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1995 Iveco 35.10 Swbs fail their MOT?
Around 67% of 1995 Iveco 35.10 Swbs fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and body, cab or chassis excessively corroded at a mounting point. Pre-checking these items can significantly improve your chances.
What should I check before my 1995 Iveco 35.10 Swb MOT?
Before your 1995 Iveco 35.10 Swb MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, body, cab or chassis excessively corroded at a mounting point, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1995 Iveco 35.10 Swb reliable for MOT?
With a 33.3% MOT pass rate, the 1995 Iveco 35.10 Swb performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.